Tel : +86-760-89921987
Fax : +86-760-88483779
Views: 0 Author: Site Editor Publish Time: 2021-09-13 Origin: Site
If you do not pay attention to maintain and clean up the bath screen in the bathroom, the glass on the bath screen will turn yellow for a long time, which will especially affect the appearance. If you want to extend its service lifespan, you must learn the correct method of cleaning and maintaining the bath screen. How to maintain bath screens?
Keep dry
Pay attention to cleaning
Watertightness
Avoid exposure
After showering each time, a lot of water droplets and water vapor will splash on the glass of the bath screen. These water droplets and water vapor must be cleaned up in time every time. If it is not cleaned for a long time, it may not be wiped. Out. The cleaning method is very simple. Use a glass scraper to scrape off the water droplets from top to bottom on the glass of the bath screen. In the process of wiping the water droplets, prepare a dry rag in your hand, and wipe the glass scraper on the dry rag frequently to prevent the moisture on the glass scraper from being brought back to the glass. After scraping the water droplets on the bath screen with a glass scraper, wipe the glass clean with a clean cloth.
When the bath screen needs to be cleaned, use a soft cloth instead of hard brushes. The cleaning agents cannot be used at will. It should be cleaned with a neutral detergent. Do not use acidic, alkaline solvents, chemicals (such as hydrochloric acid), acetone thinner and other solvents, decontamination powder, etc. to clean the bath screen, otherwise, it will have adverse effects on the human body.
The leaking of the bath screen is often due to the poor sealing of the bath screen and cracks, so it is enough to re-glue and seal it. Before gluing the bath screen, scrape off all the original sealant to clean up the gap. Note that it must be fully dried before proceeding to the next step; the embedding depth of the sealant should be greater than 3.5 mm, but not greater than 4.5 mm. Ensuring the quality of the seal is unfavorable. If the seal is too thick, it is easy to be stretched and cracked by cold and heat. After the sealant is filled, the glue seam of the bath screen should be carefully checked. If there are defects such as bubbles, hollows, broken seams, inclusions, etc., they should be dealt with in time. After the glue is applied, the glue joint should be full, dense, continuous, uniform, and free of bubbles. Also, pay attention to the use of silicone weather-resistant sealant.
In normal use, avoid direct sunlight and explode the bath screen. In a high-temperature environment, the electronic parts in the shower screen will be damaged. Moreover, the bath screen is mostly made of glass material, and prolonged exposure to the sun will increase the temperature, which is not conducive to the maintenance of the glass material.
Himalaya was established in 2005, and all products have undergone several experiments before they leave the factory. If you are engaged in bath screen-related work, you can consider our cost-effective products. Our official website is www.himalayashower.com.
content is empty!
Tel : +86-760-89921987
Fax : +86-760-88483779